Block Diagram

Core & Memory Configuration

Clocking System

 0.08 MHz
 0.04 MHz
 0.24 MHz
 0.12 MHz

Block Diagram


AHB Bus Peripherals


Slot Peripheral Description
1 SPI Master (AHB) SPI Master controller for the AHB bus. Default
2 GPIO port, 4-pin (FIXED) Fixed 4-pin GPIO port for the AHB bus. Default
3 None
Maximum 8 peripherals

APB Bus Peripherals


Slot Peripheral Description
1 SPI Master (APB) SPI Master controller for the APB bus. Default
2 UART UART Default
3 UART UART Default
4 UART UART Default
5 None
Maximum 32 peripherals
Component Core Area (mm²) Required Pins Optional Pins I/Os
SPI Master (AHB) 0.2 SDI, SDO, SCLK, CS
GPIO port, 4-pin (FIXED) 0.2 GPIO[0:3]
SPI Master (APB) 0.2 SDI, SDO, SCLK, CS
UART 0.37 TX, RX
UART 0.37 TX, RX
UART 0.37 TX, RX
RC Oscillator (10kHz) 0.2
Crystal Oscillator (32.768 kHz) 0.34
SiP I/O (internally mapped) N/A N/A N/A (16)
SiP I/O (BLE and Flash) N/A N/A N/A 11


mm²

The maximum I/Os for this package is , but your configuration has total I/Os.
The maximum die area for this package is mm², but your configuration has mm².

Final pin mapping will be based on design layout

Clock Setting


Clock Selection System Clk Freq Peripheral Clk
0.04 MHz

Run Mode Profile Configuration


Stop Run Mode Op Current (μA) Clock
Mode 1 2 3 4 5 I(D) I(A) (MHz)
SPI Master (AHB) 0.0 0.0 0.08
GPIO port, 4-pin (FIXED) 0.0 0.0 0.08
SPI Master (APB) 0.0 0.0 0.04
UART 0.0 0.0 0.04
UART 0.0 0.0 0.04
UART 0.0 0.0 0.04
RC Oscillator (10kHz) 0.0 0.3 0.08
Crystal Oscillator (32.768 kHz) 0.0 8.0 0.08

Total Current by Run Mode


Run Mode Use percentages must total 100%
Operating Current (mA)
#1 #2 #3 #4 #5
Digital (VDD=1.8V) 0.0 0.0 0.0 0.0 0.0
Analog (VDDA=3.3V) 0.01 0.01 0.01 0.01 0.01
Run Mode Use (%)

Power Consumption Estimate Summary


Operating Current (mA) Stop Mode Standby Mode
Run (all) Run (weighted) (nA) (nA)
Digital (VDD=1.8V) 0.0 0.0 0.0 0.0
Analog (VDDA=3.3V) 0.01 0.0 8000.0 0.0

BLOCK DIAGRAM

SPECIFICATIONS

SoC Design TemplateRaptor
CPU None Selected
Memory None Selected
Internal Clk

Robust 10 kHz low-voltage RC oscillator with internal R and C.

External Clk

Robust 32.768 kHz crystal oscillator.

SPI Master (AHB)

SPI Master controller for the AHB bus.

GPIO port, 4-pin (FIXED)

Fixed 4-pin GPIO port for the AHB bus.

SPI Master (APB)

SPI Master controller for the APB bus.

UART

UART

UART

UART

UART

UART

PACKAGE


POWER CONSUMPTION ESTIMATE


Operating Current (μA) Stop Mode Standby Mode
Run (all) Run (weighted) (nA) (nA)
Digital (VDD=1.8V) 0.0 0.0 0.0 0.0
Analog (VDDA=3.3V) 0.01 0.0 8000.0 0.0

0

0

0 mm²

0