SoC Configurator (Raptor_SIP)

    Core & Memory Configuration
    CPU Description
    Hardened ARM Cortex M0 microprocessor for embedded applications.
    Static RAM Description
    X-Fab 12-bit address x 32 bit data single-port SRAM

    Clocking System
    Source Clock Description
    External 1 – 4 MHz crystal oscillator. 
    Type Minimum | Maximum Value
    System Maximum 16.0 Mhz
    Peripheral Maximum 8.0 Mhz
    Internal 1 MHz RC oscillator with internal R and C.
    Type Minimum | Maximum Value
    System Maximum 8.0 Mhz
    Peripheral Maximum 4.0 Mhz

    ARMAHBL Peripherals

          Slot Peripheral Description Stop Mode IRQ
          1 QSPI external Flash controller supporting XiP. FIXED
          Option Value
          Boot Mode
          2 SPI master controller for AHB bus. FIXED
          3 General purpose I/O for AHB Bus.  FIXED
          Up to 8 more AHB peripherals can be added

          ARMAPB Peripherals

                  Slot Peripheral Description Stop Mode IRQ
                  1 UART interface controller for APB bus. FIXED
                  2 UART interface controller for APB bus. FIXED
                  3 UART interface controller for APB bus. FIXED
                  4 SPI master controller for APB bus. FIXED
                  Up to 12 more APB peripherals can be added

                  Components I/O

                  None None None None
                  Component Core Area (mm²) Required Pins Optional Pins Pin Total
                  Arm Cortex M0 - v1.1 0.68671
                  High Speed SRAM (16kB) - v1.0 0.84888
                  QSPI Flash Controller - v1.0 0.00984
                  SPI Master (AHB) - v1.0 0.00984
                  GPIO port, 4-pin (AHB) - v1.0 0.00992
                  UART (APB) - v1.0 0.05256
                  UART (APB) - v1.0 0.05256
                  UART (APB) - v1.0 0.05256
                  SPI Master (APB) - v1.0 0.00984
                  Raptor Power Circuit - v1.0 0.00244
                  SIP BLE KGD - v1.0 0.0
                  SIP Flash KGD - v1.0 0.0
                  Raptor JTAG Controller - v1.0 0.00782
                  AHB ROM - v1.0 0.00036
                  AHB Debug IO - v1.0 0.00929
                  AHB2APB Bridge - v1.0 0.0062
                  AHB Clock Control - v1.0 0.01922

                  48


                  30.25 mm²

                  The maximum I/Os for this package is , but your configuration has total I/Os.
                  The maximum die area for this package is mm², but your configuration has mm².

                  Final pin mapping will be based on design layout

                  Clock Setting

                  Clock Selection System Clk Freq Peripheral Clk
                  4.0 MHz

                  Run Mode Profile Configuration

                  Component Run Mode Op Current (μA) Clock
                  Name 1 2 3 4 5 I(D) I(A) (MHz)
                  UART (APB) 8.4 0.0 4.0
                  UART (APB) 8.4 0.0 4.0
                  UART (APB) 8.4 0.0 4.0
                  SPI Master (APB) 1.2 0.0 4.0
                  QSPI Flash Controller 2.4 0.0 8.0
                  SPI Master (AHB) 2.4 0.0 8.0
                  GPIO port, 4-pin (AHB) 3.2 0.0 8.0
                  Raptor Power Circuit 0.0 0.0 8.0
                  SIP BLE KGD 0.0 0.0 8.0
                  SIP Flash KGD 0.0 0.0 8.0
                  Raptor JTAG Controller 0.0 0.0 8.0
                  AHB ROM 0.0 0.0 8.0
                  AHB Debug IO 2.4 0.0 8.0
                  AHB2APB Bridge 1.6 0.0 8.0
                  AHB Clock Control 6.4 0.0 8.0
                  Crystal Oscillator (1 - 4 MHz) 0.0 169.6 8.0
                  RC Oscillator (1 MHz) 0.0 10.2 8.0
                  High Speed SRAM (16kB) 711.7 0.0 8.0
                  Arm Cortex M0 578.3 104.6 8.0

                  Total Current by Run Mode

                  Run Mode Use percentages must total 100%
                  Operating Current (mA)
                  #1 #2 #3 #4 #5
                  Digital (VDD=1.8V) 1.29 1.29 1.29 1.29 1.29
                  Analog (VDDA=3.3V) 0.28 0.28 0.28 0.28 0.28
                  Run Mode Use (%)

                  Power Consumption Estimate Summary

                  Operating Current (mA) Stop Mode Standby Mode
                  Run (all) Run (weighted) (nA) (nA)
                  Digital (VDD=1.8V) 1.33 1.3 480.0 0.0
                  Analog (VDDA=3.3V) 0.28 0.3 103000.0 0.0

                  SPECIFICATIONS

                  None None None None
                  SoC Design Template Raptor_SIP
                  CPU

                  Hardened ARM Cortex M0 microprocessor for embedded applications.

                  Memory

                  X-Fab 12-bit address x 32 bit data single-port SRAM

                  External Clock

                  1 – 4 MHz crystal oscillator. 

                  Internal Clock

                  1 MHz RC oscillator with internal R and C.

                  QSPI Flash Controller QSPI external Flash controller supporting XiP.
                  SPI Master (AHB)

                  SPI master controller for AHB bus.

                  GPIO port, 4-pin (AHB)

                  General purpose I/O for AHB Bus. 

                  UART (APB)

                  UART interface controller for APB bus.

                  UART (APB)

                  UART interface controller for APB bus.

                  UART (APB)

                  UART interface controller for APB bus.

                  SPI Master (APB)

                  SPI master controller for APB bus.


                  PACKAGE

                  POWER CONSUMPTION ESTIMATE

                  Operating Current (μA) Stop Mode Standby Mode
                  Run (all) Run (weighted) (nA) (nA)
                  Digital (VDD=1.8V) 1.33 1.3 480.0 0.0
                  Analog (VDDA=3.3V) 0.28 0.3 103000.0 0.0
                  None None None None

                  Licensing Cost

                  0

                  Part Cost Estimate

                  0

                  Die Area

                  0 mm²

                  0

                  Category Violation(s)

                  IRQ Violation

                  Multiple peripherals share the same IRQ value

                  I/O Violation

                  Total I/O count exceeds the selected package maximum I/O

                  Die Area Violation

                  Configuration Die Area exceeds selected package maximum die area

                  Peripheral Violation

                  Please select a valid peripheral from the dropdown menu