Logo

ROTFPGA

public

Logic tile

A reconfigurable logic circuit made of identical rotatable copies of the tile shown above containing a NAND gate, a D flip-flop and a buffer. Theoretically any circuit can be built from copies of this single tile. In practice it's quite a challenge.

Tiles are arranged in a WIDTH × HEIGHT array wrapping around at the edges. A few tiles are configured as IO where the flip-flop is connected to an input or output pin. Tiles are initially in the orientation shown above but they can be rotated counterclockwise by writing anything to their address using the wishbone bus.

This design is an entry for the MPW3 shuttle and was created from concept to tapeout within 24 hours.

If you are collaborating on this project, please click here to access your collaboration files, and click "Accept Share" in the actions column if you haven't done so already.

project layout image
project layout image
Layout Image
Owner

htfab

Summary

A reconfigurable logic circuit made of identical rotatable tiles.

Process

sky130A

Shuttle Tags

Open MPW

MPW-3

Last MPW Precheck

Succeeded

11/15/21 09:33:24 PST

Last Tapeout

Succeeded

11/15/21 10:22:16 PST